BuildATable.com - Customize Your Own Food Service Work Table Advance Tabco
Warning!
A Work Table has not been Selected Yet... Click Here to Begin.



FAQs

Types of Steel | Gauges | Undershelf/Legs | Drawers | Casters | Table Edges | Integral Sinks | Pot Racks | Overshelves | Utensil Bars | Side Splashes

STEEL TYPES

What is the Difference Between 300 and 400 Stainless Steel?
300 Series Steel is the better of the 2 with a higher amount of Nickel in the steel. 400 is less in cost but may show small surface rust specks in certain applications.

How can I Tell if the Steel is 300 or 400?
A magnet will not stick to 300 Series Stainless Steel.

300 or 400?
Click To Enlarge
GAUGE OF STAINLESS STEEL

What Does Stainless Steel Gauge Mean?
Gauge (Ga.) is the standard unit of measure to designate thickness of stainless steel. The Lower the guage number, the thicker the steel. 14 Gauge is thicker than 16 Gauge.
18 Gauge - Used more for Economy Line. Most likely to bend or dent and used on most imports.
16 Gauge - Good for more common uses (standard food prep, crafts, lite assembly).
14 Gauge - Good for heavy duty operations (pounding meat, hammering, heavy equipment). least likely to dent.

What is Gauge of Steel?
Click To Enlarge
UNDERSHELF AND OPEN BASE LEGS

What are the Benefits of an Undershelf?
Undershelves are Fully Adjustable. Multiple under shelves can be added. Great for storing supplies.

What are the Benefits of an Open Base Table?
Open Base Tables have no undershelf structure. This providses more room for storing larger items that need to be slid under a table. This style table has same support as an undershelf table because of front to back and left to right cross bracing.

SHD Drawers
Click To Enlarge
DRAWERS

What is a "Super Heavy Duty Series" Drawer?
Advance Tabco Deluxe Series Drawers is a Premium Style Drawer. These drawers are made with stainless steel front and sides with patent pending integral Ball bearing slides and noise reduction. Drawers are self closing and has a drawer stop tab to prevent the drawer from pulling all the way out . This drawer also has a removable stainless steel inset for cleaning and is NSF Approved.

What is a "Deluxe Series" Drawer?
Advance Tabco Deluxe Series Drawers are made with a Stainless steel front and have a removable inset for cleaning.

SHD Drawers
Click To Enlarge
CASTERS

What is a Standard TA-25 Caster?
Advance Tabco Standard Casters have 5" Swivel Casters, Brakes on 2. They have Rubber Wheels and will support 125 Lbs. per caster.

what is a Super Heavy Duty TA-255 Caster?
Advance Tabco Heavy Duty Casters have 5" Swivel Casters, Brakes on 2. They will support 1000 Lbs. distributed weight. Caster Wheels are made of Non-Marking Polyurethane.

Can I add additional brakes to the Casters?
Yes. You can add brakes on ALL Casters. Please use Model (TA25B).

Can I upgrade the standard Rubber Casters to Non-Marking Polyurethene Casters?
Yes. You can upgrade the caster wheels. Please use (TA25C). This upgrade is for the Standard Casters Only.

How Many Casters Come as a Set?
Casters are sold with 4 Casters Per set, However, Tables 8' or Larger require a 6 Casters which are also available.

Casters
Click To Enlarge
TA-25
Casters
Click To Enlarge
TA-255
EDGES

What is a "Bullnose" Edge?
Advance Tabco Bull Nose Edge comes standard and appears on the front and back are rounded allowing for a comfortable work surface. Sides are square, allowing the table to rest flat against another surface No charge.

What is a "Square" Edge?
All 4 sides are square, allowing for the table to fit flush against another surface. There is No charge for upgrading to this edge, but must be selected as it does not come Standard.

What is a "Countertop (marine/no drip)" Edge?
Edges are made square, but with a raised groove. Prevents liquid or small items like screws or beads from spilling or rolling onto floor.

BULLNOSE EDGE
STANDARD
Standard Bull Nose Edge
Click To Enlarge
COUNTERTOP EDGE
Optional Table Edge
Click To Enlarge
SQUARE EDGE
Optional Table Edge
Click To Enlarge
INTEGRAL SINKS WELDED TABLES

Are Advance Tabco Integral Sinks NSF Approved?
Yes. These sinks are approved by all NSF standards.

Do these sinks include a faucet?
Yes. These sinks come with a standard deck mounted faucet. An optional splash mounted faucet is also available.

Integral Sinks
Click To Enlarge
POTRACKS

What is a "Mid Mount" Potrack?
Mid Mounted Pot Racks are used on work tables that will be worked on from both sides.

What is a "Rear Mount" Potrack?
Rear Mounted Pot Racks are on the rear of work tables that have no rear splash, allowing maximum work space from one side only.

What is a "Splash Mount" Potrack?
Splash Mounted Pot Racksare mounted on the rear of work tables and goes through the Rear Splash

Mid Mount Pot Rack
Click To Enlarge
MID MOUNT
rear Mount Pot Rack
Click To Enlarge
REAR MOUNT
Side Splash for Tables
Click To Enlarge
SPLASH MOUNT
UTENSIL BARS

Can the Utensil Bars fit any Post?
Advance Tabco Utensil Bars are manufactured to fit a standard Advance Tabco 1-5/8" Post.

Are these Bars Adjustable?
Yes. These bars are adjustable to any hight and can conveniently hold utensils or even pots and pans.

Can I add more than One Utensil Bar?
Yes. You can add an additional Utensil bar to any of the Pot Rack Components shown above.

Does the Utensil Bars come with Hooks?
Yes. All Utensil Bars come with Double sided hooks. Quantity of hooks will vary based on Length of Utensil Bar.

Utensil Bars
Click To Enlarge
OVERSHELVES

What is a "Mid Mount" Ovsrshelf?
Mid Mounted Overshelves are used on work tables that will be worked on from both sides.

What is a "Rear Mount" Overshelf?
Rear Mounted Overshelves are on the rear of work tables that have no rear splash, allowing maximum work space from one side only.

What is a "Splash Mount" Overshelf?
Splash Mounted Overshelvesare mounted on the rear of work tables and goes through the Rear Splash

Mid Mount Pot Rack
Click To Enlarge
MID MOUNT
Mid Mount Pot Rack
Click To Enlarge
REAR MOUNT
Mid Mount Pot Rack
Click To Enlarge
SPLASH MOUNT
SIDE SPLASHES

What Side Splash heights are available?
Side splashes are available in heights of 1-1/2", 5", and 10" (the same sizes as your backsplash that you selected).

Can a Side Splash be on Both Sides?
Yes. Side Splashes can be added to the left, right, or both sides of a table. Typically side splashes are used on tables with a sink built in, to keep water from splashing off the side of the table.

Side Splash for Tables
Click To Enlarge

Types of Steel | Gauges | Undershelf/Legs | Drawers | Casters | Table Edges | Integral Sinks | Pot Racks | Overshelves | Utensil Bars | Side Splashes

Back To Top


Quote Cart Submit Quote 
0 items in your Quote Cart  



Made in USA 

Best In Class in FES Magazine

PLEASE NOTE: All prices are list prices. An authorized Advance Tabco Dealer will contact you with actual pricing.

HOME CONTACT USFAQs WANT BUILDATABLE.COM ON YOUR SITE?NEED BUILDATABLE LOGOS?

©Advance Tabco 2017. All Rights Reserved | Terms | Privacy