Email Us
800-645-3166

Table Top Load Capacity

<< Go Back | Sink Bowl Standards | Corrosion | Stainless Steel Equipment Care


AS IT APPLIES TO WORKTABLES MANUFACTURED BY ADVANCE TABCO

Weight Capacity For Distributed Load In Lbs.
For Flat Top Work Table With Undershelf Up To 60” In Length 61” To 84” In Length Over 84” With Center Leg
14 Gauge Table Top 1000 800 1500
16 Gauge Table Top 800 600 1200
18 Gauge Table Top 400 300 500
14 Gauge Equipment Stand (ES/EG Series) 1000 1000 1500
Special Value Equipment Stand (ES-LS/ EG-LG Series) 600 600 N/A
Standard Undershelf (Stainless Or Galvanized) 300 300 450
ADJUSTMENTS TO THE ABOVE VALUES:
  • Table Tops With 5” Tall Or 10” Tall Rear Splash With 1” Or 2” Return
    Increases capacity of top by 10% (Multiply by 1.1)
  • Table Tops With Open Base Instead Of Undershelf (With Rear Cross Brace Installed)
    Reduces capacity of top by 20% (Multiply by 0.8)
  • Adding An Extra Set Of Legs In The Center Of A Table (Not Available On All Table Series)
    Increases top and undershelf capacity by 50% (Multiply by 1.5)
  • TA-366A Reinforced Understructure Under Table Top (Not Available On All Table Series)
    Increases the capacity of a table top by 30% (Multiply by 1.3)
  • TA-366 Reinforced Understructure On Undershelf (Not Available On All Table Series)
    Increases capacity of the undershelf by 30% (Multiply by 1.3)
  • Upgrade Stainless Undershelf To 16 Gauge (TA-94) (Not Available On All Table Series)
    Increases undershelf capacity by 20% (Multiply by 1.2)
  • Upgrade Stainless Undershelf To 14 Gauge (TA-94A) (Not Available On All Table Series)
    Increases undershelf capacity by 30% (Multiply by 1.3)
PLEASE NOTE:
MAXIMUM LOAD On Table (Top And Undershelf Combined) With all adjustments above cannot exceed 1800 pounds.
Tables With Casters Are Limited By The Capacity Of The Selected Caster As Well

 

Click Here to Download Entire "PRODUCT STANDARDS AND USE" Guide (PDF)