Email Us
800-645-3166
       

Sink Modifications

  1. Home
  2. Equipment Modifications
  3. Sink Modifications
  4. Sink Modifications

Sink Modifications

...

CDR-5

Condiment Holder, countertop, portable, 36-3/4"W x 13-5/16"D x 16"H, accommodates (5) 1/3 pans (not included), stainless steel, plastic feet

$1208

Details

FC-455

Sink Cover, stainless steel, for fabricated bowls

$691

Details

FE-SS-12

Stainless steel leg upgrade, for sinks with 12" deep bowls, (set of 4) legs with stainless steel bullet feet

$667

Details

FE-SS-14

Stainless steel leg upgrade, for sinks with 14" deep bowls, (set of 4) legs with stainless steel bullet feet

$667

Details
...

K-106

Mirror Highlight sink upgrade

$608

Details

K-148

Drop-in bowl depth modification

$105

Details

K-23

Sink or dish table legs welded to cross rails (and optional undershelf if ordered), shipped set up and crated (per sink) Top is not welded to legs (for fully welded sink or dish table specify K-23A).

$561

Details

K-23A

Sink or dish table legs welded to leg gussets under table top and to cross rails (and optional undershelf if ordered), shipped set up and crated (per sink)

$741

Details

K-24

Shell crated

$433

Details
...

K-350

Upgraded Finish (recommended for residential or front-of-house applications)

$503

Details
...

K-37

Anti-Siphon vacuum breaker holes

$168

Details
...

K-440

Waste trough, furnished with a 2" deep removable basket

$1277

Details

K-447

High backsplash, up to 18", (per linear foot)

$265

Details

K-448

High backsplash, up to 13", (per linear foot)

$212

Details

K-450

Extend drainboard length, (per linear foot. Drainboards exceeding 36" in length with not have a crease or pitch)

$537

Details

K-451

Drainboard Corner Turn (each)

$1876

Details

K-452

Control Bracket 8" x 12" (each)

$373

Details

K-453

Control Bracket, 14" x 16" (each)

$400

Details
...

K-454

Side splash, integral (welded), for NSF sinks & dish tables, height matches backsplash height (specify side)

$581

Details
...

K-456

Scrap BLock installed

$546

Details
...

K-457

Replacement Rubber Scrap Block

$166

Details
...

K-460

Installation, disposal cone with 8" x 12" control bracket & faucet holes (each)

$1115

Details
...

K-460A

Installation, disposal cone with 14" x 16" control bracket & faucet holes (each)

$1184

Details
...

K-461

Install collar, with 8" x 12" control bracket

$1115

Details
...

K-461A

Install collar, with 14" x 16" control bracket

$1184

Details

K-470

Sink bowl depth modification (14" maximum - specify depth required) (per bowl)

$242

Details

K-472

Faucet hole revision (each)

$176

Details

K-473

Working height revision, (per sink)

$141

Details

K-476

Punch hole for overflow drain, (1) punch required for each overflow drain, (please specify make & model of overflow used) (required for overflows unless using K-15)

$80

Details
...

K-479

Undershelf, stainless steel, (per linear foot)

$337

Details
...

K-480

Shelf, 12" wide, stainless steel, (min. 3 ft.) (per linear foot)

$350

Details
...

K-480A

Shelf, 15" wide, stainless steel, (min 3 ft) (per linear foot)

$503

Details

K-490

Provision for Pot Washer, (for a "Wells PW-106" only) (each)

$1353

Details

K-491

Provision for Hatco Heater (each)

$266

Details

K-495

Turn Down Backsplash (includes wall clips)

$233

Details
...

K-498

Tubular Overshelf, 12" wide, (min. 3 ft.) (per linear foot)

$528

Details
...

K-499

Pot Rack, stainless steel, (per linear foot)

$419

Details
...

K-500

Apron, to cover sink bowls, stainless steel, (per sink)

$1316

Details

K-500A

Apron with lever drain support holes, to cover sink bowls, stainless steel (per sink)

$1530

Details

K-508

Modification to reduce length, start with next largest size then add "K-508" to model number for sinks & dish tables (nc)

$0

Details

K-508A

Special modification for sinks & dish tables

$355

Details

K-510

Prepare sink for undercounter dishwasher. (24" drainboard or larger) (per sink)

$191

Details

K-520

Poly Board & Stainless Steel Sink Cover Holder, accommodates (2) boards 5/8" thick, attaches to legs on work table

$904

Details

K-57

Welded field joint (welded in field by others)

$391

Details
...

K-700

Side splash, removable, for NSF sinks & dish tables, 12" tall, reversible, stainless steel (fits either end) (Specify model to be installed on)

$638

Details
...

K-700F-18

Side splash, removable, for FC & FE series sinks with 18" front-to-back bowls, 12" tall, reversible, stainless steel (fits either end) (must specify model to be installed on) (for other size sinks or dish tables use K-700)

$670

Details
...

K-700F-24

Side splash, removable, for FC & FE series sinks with 24" front-to-back bowls, 12" tall, reversible, stainless steel (fits either end) (must specify model to be installed on) (for other size sinks or dish tables use K-700)

$704

Details
...

K-700F-30

Side splash, removable, for FC & FE series sinks with 30" front-to-back bowls, 12" tall, reversible, stainless steel (fits either end) (must specify model to be installed on) (for other size sinks or dish tables use K-700)

$778

Details

K-76

Paint-on sound deadening under top (each)

$746

Details

K-77

Splash cutout for pipe chase (chase by others)

$265

Details
...

TA-130

Cutlery Dispenser Holder, under counter mount, holds most round cutlery holders (not included-specify diameter), mounted at an angle, sold per linear foot (approx (2) cylinders per foot) (factory install only)

$316

Details
...

TA-135

Plate Shelf, under counter mount, 10" deep, for enclosed base tables without doors only, factory installed, (sold per linear foot) (if ordering less than the same number of linear feet as the length of the table, must add TA-42 interior partition)

$377

Details
...

TA-16

(1) Galvanized Leg, 34-1/2"H, with plastic adjustable bullet foot

$85

Details
...

TA-16-4

(4) Galvanized Legs, 34-1/2"H, with plastic adjustable bullet feet

$341

Details
...

TA-16-6

(6) Galvanized Legs, 34-1/2"H, with plastic adjustable bullet feet

$510

Details
...

TA-19

Flanged Bullet Foot Insert, stainless steel (per foot) (fully collapsed it is 1-1/2" tall)

$81

Details
...

TA-20

(1) Stainless Steel Leg , 34 1/2"H, with stainless steel adjustable bullet foot

$99

Details
...

TA-20-4

(4) Stainless Steel Legs, 34 1/2"H, with stainless steel adjustable bullet feet

$392

Details
...

TA-20-6

(6) Stainless Steel Legs, 34 1/2"H, with stainless steel adjustable bullet feet

$590

Details
...

TA-21

Bullet foot, standard, 1" adjustment range, stainless steel (per foot)

$39

Details