Advance Tabco Enclosed Base Table Accessories

CG-120

Corner Guard, 120" long x 2" x 2", 16 gauge stainless steel, includes: adhesive tape backing

$414

Details

CG-48

Corner Guard, 48" long x 2" x 2", 16 gauge stainless steel, includes: adhesive tape backing

$202

Details

CG-60

Corner Guard, 60" long x 2" x 2", 16 gauge stainless steel, includes: adhesive tape backing

$266

Details

CG-72

Corner Guard, 72" long x 2" x 2", 16 gauge stainless steel, includes: adhesive tape backing

$296

Details

CG-84

Corner Guard, 84" long x 2" x 2", 16 gauge stainless steel, includes: adhesive tape backing

$349

Details

CG-96

Corner Guard, 96" long x 2" x 2", 16 gauge stainless steel, includes: adhesive tape backing

$382

Details

GSG-12-132

Sleek Shield Food Shield self service with adjustable front glass, 132"W x 12"D x 18"H, with glass top shelf, 3/8" thick heat tempered glass front & 1/4" thick side panels (side panels 18" deep to meet NSF requirements), 3/8" thick heat tempered top glass, equipped with Chamber Lock technology fixed to upright legs, allowing rotation in 15 degree intervals, maximum load on top glass 100 pounds evenly distributed weight, includes: additional center support leg (This is a non-stock special order item & may not be cancelled once ordered)

$7831

Details

GSG-12-144

Sleek Shield Food Shield self service with adjustable front glass, 144"W x 12"D x 18"H, with glass top shelf, 1/4" thick heat tempered glass front & side panels (side panels 18" deep to meet NSF requirements), 3/8" thick heat tempered top glass, equipped with Chamber Lock technology fixed to upright legs, allowing rotation in 15 degree intervals, maximum load on top glass 100 pounds evenly distributed weight, includes: additional center support leg (This is a non-stock special order item & may not be cancelled once ordered)

$8276

Details

NSGD-26-2WELL

Sleek Shield Food Shield self-service, double sided, 33-11/16"W x 32-1/4"D, 18-3/4" tall with stainless steel top shelf, 1/4" thick heat tempered glass front & side panels, equipped with Chamber Lock technology fixed to upright legs, allowing rotation in 15 degree intervals, NSF (for Advance Tabco (2) well hot or cold food t (This is a non-stock special order item & may not be cancelled once ordered)ables) (NOTE: due to mounting requirements, this food Shield extends 15/16" beyond the end of the hot or cold food table on each end. Units set side by side must allow for this additional space) (This is a non-stock special order item & may not be cancelled once ordered)

$8217

Details

NSGD-26-3WELL

Sleek Shield Food Shield self-service, double sided, 49"W x 32-1/4"D, 18-3/4" tall with stainless steel top shelf, 1/4" thick heat tempered glass front & side panels, equipped with Chamber Lock technology fixed to upright legs, allowing rotation in 15 degree intervals, NSF (for Advance Tabco (3) well hot or cold food tables) (NOTE: due to mounting requirements, this food Shieldextends 15/16" beyond the end of the hot or cold food table on each end. Units set side by side must allow for this additional space) (This is a non-stock special order item & may not be cancelled once ordered)

$8439

Details

NSGD-26-4WELL

Sleek Shield Food Shield self-service, double sided, 64-5/16"W x 32-1/4"D, 18-3/4" tall with stainless steel top shelf, 3/8" thick heat tempered glass front & 1/4" side panels, equipped with Chamber Lock technology fixed to upright legs, allowing rotation in 15 degree intervals, NSF (for Advance Tabco (4) well hot or cold food tables) (NOTE: due to mounting requirements, this food Shieldextends 15/16" beyond the end of the hot or cold food table on each end. Units set side by side must allow for this additional space) (This is a non-stock special order item & may not be cancelled once ordered)

$9408

Details

NSGD-26-5WELL

Sleek Shield Food Shield self-service, double sided, 79-5/8"W x 32-1/4"D, 18-3/4" tall with stainless steel top shelf, 1/4" thick heat tempered glass front & side panels, equipped with Chamber Lock technology fixed to upright legs, allowing rotation in 15 degree intervals, NSF (for Advance Tabco (5) well hot or cold food tables) (NOTE: due to mounting requirements, this food Shieldextends 15/16" beyond the end of the hot or cold food table on each end. Units set side by side must allow for this additional space) (This is a non-stock special order item & may not be cancelled once ordered)

$9599

Details

NSGD-26-6WELL

Sleek Shield Food Shield self-service, double sided, 94-15/16"W x 32-1/4"D, 18-3/4" tall with stainless steel top shelf, 1/4" thick heat tempered glass front & side panels, equipped with Chamber Lock technology fixed to upright legs, allowing rotation in 15 degree intervals, NSF (for Advance Tabco (6) well hot or cold food tables) (NOTE: due to mounting requirements, this food Shieldextends 15/16" beyond the end of the hot or cold food table on each end. Units set side by side must allow for this additional space) (This is a non-stock special order item & may not be cancelled once ordered)

$10229

Details

NSGD-40-48

Sleek Shield Food Shield self service with adjustable front glass, double sided, 48"W x 40"D, 19-1/4" tall with stainless steel top shelf, 1/4" thick heat tempered glass front & side panels, equipped with Chamber Lock technology fixed to upright legs, allowing rotation in 15 degree intervals (This is a non-stock special order item & may not be cancelled once ordered)

$8037

Details

NSGD-40-60

Sleek Shield Food Shield self service with adjustable front glass, double sided, 60"W x 40"D, 19-1/4" tall with stainless steel top shelf, 1/4" thick heat tempered glass front & side panels, equipped with Chamber Lock technology fixed to upright legs, allowing rotation in 15 degree intervals (This is a non-stock special order item & may not be cancelled once ordered)

$8962

Details

NSGD-40-72

Sleek Shield Food Shield self service with adjustable front glass, double sided, 72"W x 40"D, 19-1/4" tall with stainless steel top shelf, 1/4" thick heat tempered glass front & side panels, equipped with Chamber Lock technology fixed to upright legs, allowing rotation in 15 degree intervals (This is a non-stock special order item & may not be cancelled once ordered)

$9143

Details

NSGD-40-84

Sleek Shield Food Shield self service with adjustable front glass, double sided, 84"W x 40"D, 19-1/4" tall with stainless steel top shelf, 1/4" thick heat tempered glass front & side panels, equipped with Chamber Lock technology fixed to upright legs, allowing rotation in 15 degree intervals (This is a non-stock special order item & may not be cancelled once ordered)

$9417

Details

NSGD-40-96

Sleek Shield Food Shield self service with adjustable front glass, double sided, 96"W x 40"D, 19-1/4" tall with stainless steel top shelf, 1/4" thick heat tempered glass front & side panels, equipped with Chamber Lock technology fixed to upright legs, allowing rotation in 15 degree intervals (This is a non-stock special order item & may not be cancelled once ordered)

$10113

Details

OCG-48-SS

Corner Guard, 48"H x 4" x 4", 16 gauge stainless steel, includes: adhesive tape backing

$382

Details

SGCC-108

Vertical Food Shield 108" wide, height as specified (top of glass must be at least 60" above the floor), 3/8" heat tempered glass front & 1/4" thick side panels (bottom of panel not more than 6" above work surface to meet NSF requirements), requires side Shield for stability. If side Shield are not being used, posts must be extended through countertop for added stability (Note: food Shield are also known as sneeze guards or breath Shield) (This is a non-stock special order item & may not be cancelled once ordered)

$11320

Details

SGCC-120

Vertical Food Shield 120" wide, height as specified (top of glass must be at least 60" above the floor), 3/8" heat tempered glass front & 1/4" thick side panels (bottom of panel not more than 6" above work surface to meet NSF requirements), requires side Shield for stability. If side Shield are not being used, posts must be extended through countertop for added stability (Note: food Shield are also known as sneeze guards or breath Shield) (This is a non-stock special order item & may not be cancelled once ordered)

$12404

Details

SGCC-132

Vertical Food Shield 132" wide, height as specified (top of glass must be at least 60" above the floor), 3/8" heat tempered glass front & 1/4" thick side panels (bottom of panel not more than 6" above work surface to meet NSF requirements), requires side Shield for stability. If side Shield are not being used, posts must be extended through countertop for added stability (Note: food Shield are also known as sneeze guards or breath Shield) (This is a non-stock special order item & may not be cancelled once ordered)

$13186

Details

SGCC-144

Vertical Food Shield 144" wide, height as specified (top of glass must be at least 60" above the floor), 3/8" heat tempered glass front & 1/4" thick side panels (bottom of panel not more than 6" above work surface to meet NSF requirements), requires side Shield for stability. If side Shield are not being used, posts must be extended through countertop for added stability (Note: food Shield are also known as sneeze guards or breath Shield) (This is a non-stock special order item & may not be cancelled once ordered)

$14130

Details

SGCC-36

Vertical Food Shield 36" wide, height as specified (top of glass must be at least 60" above the floor), 1/4" heat tempered glass front & side panels (bottom of panel not more than 6" above work surface to meet NSF requirements), requires side Shield for stability. If side Shield are not being used, posts must be extended through countertop for added stability (Note: food Shield are also known as sneeze guards or breath Shield) (This is a non-stock special order item & may not be cancelled once ordered)

$6368

Details

SGCC-48

Vertical Food Shield 48" wide, height as specified (top of glass must be at least 60" above the floor), 1/4" heat tempered glass front & side panels (bottom of panel not more than 6" above work surface to meet NSF requirements), requires side Shield for stability. If side Shield are not being used, posts must be extended through countertop for added stability (Note: food Shield are also known as sneeze guards or breath Shield) (This is a non-stock special order item & may not be cancelled once ordered)

$7033

Details

SGCC-60

Vertical Food Shield 60" wide, height as specified (top of glass must be at least 60" above the floor), 3/8" heat tempered glass front & 1/4" thick side panels (bottom of panel not more than 6" above work surface to meet NSF requirements), requires side Shield for stability. If side Shield are not being used, posts must be extended through countertop for added stability (Note: food Shield are also known as sneeze guards or breath Shield) (This is a non-stock special order item & may not be cancelled once ordered)

$7927

Details

SGCC-72

Vertical Food Shield 72" wide, height as specified (top of glass must be at least 60" above the floor), 3/8" heat tempered glass front & 1/4" thick side panels (bottom of panel not more than 6" above work surface to meet NSF requirements), requires side Shield for stability. If side Shield are not being used, posts must be extended through countertop for added stability (Note: food Shield are also known as sneeze guards or breath Shield) (This is a non-stock special order item & may not be cancelled once ordered)

$10038

Details

SGCC-84

Vertical Food Shield 84" wide, height as specified (top of glass must be at least 60" above the floor), 3/8" heat tempered glass front & 1/4" thick side panels (bottom of panel not more than 6" above work surface to meet NSF requirements), requires side Shield for stability. If side Shield are not being used, posts must be extended through countertop for added stability (Note: food Shield are also known as sneeze guards or breath Shield) (This is a non-stock special order item & may not be cancelled once ordered)

$9955

Details

SGCC-96

Vertical Food Shield 96" wide, height as specified (top of glass must be at least 60" above the floor), 3/8" heat tempered glass front & 1/4" thick side panels (bottom of panel not more than 6" above work surface to meet NSF requirements), requires side Shield for stability. If side Shield are not being used, posts must be extended through countertop for added stability (Note: food Shield are also known as sneeze guards or breath Shield) (This is a non-stock special order item & may not be cancelled once ordered)

$10474

Details

TA-101

Rear Tray Lock (per linear foot)

$130

Details

TA-11C

Sink Welded Into Table Top, 20"W x 20"D x 8" deep bowl, includes faucet, NSF (must specify sink location)

$1895

Details

TA-11D

Sink Welded Into Table Top, 20"W x 20"D x 12" deep bowl, includes faucet, NSF (must specify sink location)

$2157

Details

TA-11E

Sink Welded Into Table Top, 24"W x 24"D x 14" deep bowl, includes faucet, NSF (must specify sink location)

$2518

Details

TA-11G

Sink Welded Into Table Top, 28"W x 20"D x 14" deep bowl, includes faucet (must specify sink location)

$2522

Details

TA-19L

Leg, flanged foot, threaded stem, for cabinet base units, stainless steel, 1/2-13 x 3/4" thread

$111

Details

TA-20L

Leg, threaded stem, for cabinet base units, stainless steel, 1/2-13 x 3/4" thread

$96

Details

TA-25

Casters, 5", swivel, with rubber wheels (set of 4) (2 with brakes)

$594

Details

TA-255

Casters, expanding adapter, for 1-5/8" dia. O.D. tube/table legs, 400 lb capacity per caster, set of (4) (2 with brakes)

$791

Details

TA-255AP

Casters, 5", threaded stem, for cabinet base units, 300 lb capacity per caster, set of (6) (2 with brakes), 1/2-13 x 3/4" thread

$1360

Details

TA-255B

For brakes on all 4 wheels (Equipment casters) ? Add to any price of the following models: TA-255, TA-356, TA-25ES & TA-25EG

$387

Details

TA-255P

Casters, 5", threaded stem, for cabinet base units, 300 lb capacity per caster, set of (4) (2 with brakes), 1/2-13 x 3/4" thread

$934

Details

TA-255PB

For Brakes on All Wheels (enclosed base casters, set of (4) TA-255P or set of (6) TA-255AP) (upgrade only, must order casters separately)

$448

Details

TA-256

Casters, 5", swivel, expanding adapter, for 1-5/8" dia. O.D. tube/table legs, 400 lb capacity per caster, set of (6) (2 with brakes)

$1047

Details

TA-25A

Casters, 5", swivel, with rubber wheels, set of (6) (2 with brakes)

$897

Details

TA-25B

Upgrade standard casters to have brakes on all wheels (upgrade only, must order casters separately)

$284

Details

TA-25C

X.H.D. Urethane Wheel Upgrade, for TA25A or TA25 casters (per caster)

$50

Details

TA-29

Capping Strip (per linear foot)

$92

Details

TA-46SKEY-HL302

Replacement Keys, for TA-46 (sliding door) Lock (set of 2 keys)

$59

Details

TA-54

Removable kick plate, (per linear foot)

$216

Details

TA-63

Removable Shelving Upgrade, (add to the cost of standard shelf) (per table)

$552

Details

TA-83

Spice Bin, (max. (1) per ft.) (each)

$329

Details

TA-84A

Knife Rack, rolled rim type

$512

Details

TA-84B

Knife Rack, poly table type

$512

Details

TA-84C

Knife Rack, square edge type

$512

Details

TA-90

Drawer Adapter/Non Catalog Tables, specify table width (priced per pair)

$91

Details

TA-93

Wall Clips, (for 5" & 10" splash only) (per table)

$111

Details

TA-98

1" stainless steel flat bar in lieu of chain

$414

Details

WALLCAP

Wall Cap, 2" x wall thickness x 2" x height, 16 ga type 304 stainless steel (per linear foot). Specify wall thickness (maximum 6"), height (maximum 10 feet) (minimum charge 4 linear feet)

$79

Details